Hypersonic Speed & Ultra-High Temperature Ceramics

by | Published on Oct 4, 2021 | Last updated Feb 13, 2023

Light Speed
The history of speed shows the greatest ingenuity, in developing from a single horsepower to some of the mightiest machines traveling at the greatest velocities. Speed has always required cutting edge technology to continue breaking the constraints, to allow us to move faster, in a whole range of environments. Ultra high temperature ceramics play an interesting part in the technological advancements of speed.Advanced ceramics have enabled the manufacture of machines to travel at speeds in harsh environments, particularly in the last decades where any increase in speed causes an increase in friction in our atmosphere, to the point where the heat generated from atmospheric friction can erode the materials used. High temperature requirements, combined with other demands for lightweight materials and resistance to wear, materials in the Boride Nitride and Carbide groups combined with transitional elements such as tantalum, Hafnium, and titanium are some of the materials being used.Precision Ceramics range of ceramic materials offer varying characteristics to match similar demanding requirements.
Space Entry
Manned Space craft re-entering the earth’s atmosphere from low earth orbit can be travelling at over 10,000 meters per second with re-entry temperatures of over 1800°C. This is above the melting point of steel, and the glow from the heat shielding can be easily seen during this deceleration.The space shuttle ceramic shielding was the one of the stories in this phase of space exploration, but the shuttle itself was only capable of 18,000 miles an hour in space.Ceramics within the atmosphere have reached their greatest challenge with the dawn of Hypersonic flight. Hypersonic is classed as Mach 5 or above, possibly up to Mach 15, but at Mach 5 or 3800 mph, temperatures are already at 1800°C on the leading edges. In comparison a typical rifle bullet travels at only Mach 3.A projectile travelling at Mach 15, could be seeing temperatures of over 6000°C in the Atmosphere. The current best ceramic Hafnium Carbide has a melting point of 3958°C, so the challenge is the protection of a projectile not from the enemy but from nature.

Ultra-High Temperature ceramics (UHTC) are classed as those with Melting points over 2000°C so you can see the challenge. The elevated temperature combined with the presence of oxygen increases the problems.

Once out of the earth’s Atmosphere, speeds can increase without the corresponding temperature increase and again ceramics are at the forefront. The development of Electrical propulsion in space has led the way to reducing the cost of satellites, and space exploration, where photon energy from the sun is converted to electrical energy, which is used to propel plasma over a ceramic insulator. The ceramic a BN/AlN compound – Shapal Hi-M Soft – or a BN material such as PCBN5000 with excellent electrical insulation allows the plasma to accelerate to up to 20,000 meters a second.

The current record holder is the Juno probe at 165,000 mph, an electrically powered spacecraft.

Interested in finding out more and if any of our materials are the right fit for your application? Please don’t hesitate to get in touch.

Related topics:

Macor Material Brand

Materials

Precision Ceramics offers a wide range of advanced advanced ceramic materials to ensure that we have the right material for your application.

Shapal Hi M Soft

Shapal Hi M Soft™

Machinable AlN

Shapal Hi-M Soft is a hybrid type of machinable Aluminium Nitride (AlN) ceramic that offers high mechanical strength and thermal conductivity.

Most Recent Posts

Ceramic Materials: Thermal Conductivity & Insulation

Ceramic Materials: Thermal Conductivity & Insulation

When we think about ceramic materials and thermal conductivity, our first instinct might be to assume they're always excellent thermal insulators. However, the reality is that engineering ceramics come with a wide range of thermal conductivities, with the lowest and...

Welcoming Andy Duncan as Business Development Director

Welcoming Andy Duncan as Business Development Director

We are excited to welcome Andy Duncan to the Precision Ceramics family as our new Business Development Director. “I am delighted to be joining the Precision Ceramics Team in the role of Business Development Director. I hope that my 30 years in technical sales...

A History of Hall Effect Thrusters

A History of Hall Effect Thrusters

The history of Hall Effect Thrusters date back to 1911 when it was originally conceptualized and began being implemented in the 1950’s. They are now the main method of satellite propulsion in space. The move away from flammable propellant has spawned a wide array of...