Chicken & Egg with Technical Ceramics

by | Nov 1, 2018

Throughout history, philosophers and scientists have confronted the dilemma “which came first, the chicken or the egg”? To ancient philosophers, this problem was at the center of their questions as to how the universe and life on planet earth began. Even more recently, scientists such as Stephen Hawking have argued that the egg came before the chicken.

In ceramics too, this age-old idiom has a strange parallel – “which came first, the materials or the application?”

Most technical ceramic materials reach a point when they move from university-based research (material produced in laboratory quantities) into small batch production in industry and this tipping point is either driven by an inherent belief in the materials potential or an actual application.

The development of an existing material to an improved state is a relatively small step. The production of a new material without any commercial volume behind it is something far more challenging.

Zirconia, and particularly the yttria-stabilized variant, is an interesting case in point. The material had great properties, was fracture tough, and was a game changer on how people viewed brittle ceramics. It was also a material looking for an application.

Today, we see yttria-stabilized zirconia in many diverse products including metering pumps, blades, dental inserts, biomedical implants, air bag sensors, and wear parts.

In its infancy and before volume applications were thought of, tested, and approved, suggestions for uses came and went.

Geoff Randle, Precision Ceramics Business Director, recalls:

“Some of the more fanciful projects were, I’m sure, developed for their publicity alone. But one I remember vividly – studs for soccer cleats. The application would have brought the material into the lives of many people, driven attention to a new material, proved that fracture tough ceramics worked and dispelled the fragile ceramics label. The studs would wear longer than the plastic or aluminum more commonly used and running on grass would not be an issue. However, as all sports enthusiasts know, the locker room floor is not grass, but usually tiles or cement, and grass hides stones. Not all soccer fields are the same quality as the pristine manicured turf of Wembley!

The project failed as even small chips revealed a razor-sharp edge and in a mistimed tackle even a small sharp chip could cause a significant injury. As a consequence, the project was dropped in favor of other more suitable materials.”

Ceramic Chicken & Eggs photograph reproduced by kind permission of Bùi Nam Phong from Pexels.

Geoff Randle

Geoff Randle (Author)

Geoff Randle, Business Director of Precision Ceramics has a distinguished career spanning over 45 years of working with technical ceramics. With experience ranging from production control and manufacturing of Oxide ceramics, to specializing in sales of lasers, scientific instruments, ballistic armor and metalizing of ceramics. Geoff’s wealth of knowledge can guide you towards the best suited technical ceramic for your application.

Most Recent Posts

Ceramic Materials: Thermal Conductivity & Insulation

Ceramic Materials: Thermal Conductivity & Insulation

When we think about ceramic materials and thermal conductivity, our first instinct might be to assume they're always excellent thermal insulators. However, the reality is that engineering ceramics come with a wide range of thermal conductivities, with the lowest and...

High Strength ‘Ceramic Steel’ Zirconia

High Strength ‘Ceramic Steel’ Zirconia

Unlike traditional ceramics that tend to be hard and brittle, Zirconia (ZrO2) has high strength, wear resistance and a flexibility far beyond those of most other technical ceramics. Zirconia (ZrO2) also has excellent corrosion and chemical resistance without the...

Welcoming Andy Duncan as Business Development Director

Welcoming Andy Duncan as Business Development Director

We are excited to welcome Andy Duncan to the Precision Ceramics family as our new Business Development Director. “I am delighted to be joining the Precision Ceramics Team in the role of Business Development Director. I hope that my 30 years in technical sales...