New USA Representation for Barat

by | Jul 15, 2017

Barat Ceramics, the German specialist ceramic-to-metal seal company has appointed Precision Ceramics to represent them in the USA.

The full range of metalized ceramics, active alloy-brazed and brazed ceramic-to-metal seals, glazed and metalized, will be covered.

Barat has a worldwide reputation for design and build and can supply small quantity production runs, built and tested to a leak rate of <10-9 torr l/sec.

Precision Ceramics USA will offer design advice through to production on new applications together with competitive pricing for existing products.

Brazing options vary from 780ºC up to 980ºC in a variety of materials. Step brazing on the same part can be accommodated for complex assemblies.

Parts up to 8” diameter can be metalized and ceramics of unusual geometries with multiple face and bore seal points can be accommodated in the same component.

A wide variety of metals from the standard 42% nickel iron up to specials such as titanium can be attached. A wide variety of plating can also be applied on to the metalized surface from nickel to copper and gold depending on the requirements and braze options.

Alumina from 96% up to 99% purity is used depending on the process and application.

Geoff Randle

Geoff Randle (Author)

Geoff Randle, Business Director of Precision Ceramics has a distinguished career spanning over 45 years of working with technical ceramics. With experience ranging from production control and manufacturing of Oxide ceramics, to specializing in sales of lasers, scientific instruments, ballistic armor and metalizing of ceramics. Geoff’s wealth of knowledge can guide you towards the best suited technical ceramic for your application.

Most Recent Posts

Ceramic Materials: Thermal Conductivity & Insulation

Ceramic Materials: Thermal Conductivity & Insulation

When we think about ceramic materials and thermal conductivity, our first instinct might be to assume they're always excellent thermal insulators. However, the reality is that engineering ceramics come with a wide range of thermal conductivities, with the lowest and...

High Strength ‘Ceramic Steel’ Zirconia

High Strength ‘Ceramic Steel’ Zirconia

Unlike traditional ceramics that tend to be hard and brittle, Zirconia (ZrO2) has high strength, wear resistance and a flexibility far beyond those of most other technical ceramics. Zirconia (ZrO2) also has excellent corrosion and chemical resistance without the...

Welcoming Andy Duncan as Business Development Director

Welcoming Andy Duncan as Business Development Director

We are excited to welcome Andy Duncan to the Precision Ceramics family as our new Business Development Director. “I am delighted to be joining the Precision Ceramics Team in the role of Business Development Director. I hope that my 30 years in technical sales...