Tokuyama AlN Powders

by | Jun 20, 2017

Precision Ceramics USA are pleased to announce that it has been selected as the Distributor of Tokuyama’s ALN powders in North America.

The successful development of Tokuyama’s Shapal Hi-M Soft machinable ALN/BN composite in America has led to the choice of Precision Ceramics as the powder distribution partner.

Grade H-T

A granulated free flowing material with sintering aid and organic binder, ready to press and form. Supplied in 10kg dry nitrogen packed containers , this material can be used on its own or with auxiliary sintering agents to produce a high purity material with low oxygen content.

Grade H

This is the base powder used to produce the H-T granule. Grade H is a high purity, low oxygen content base powder with fine controlled particle distribution designed to give a translucent finished product but without the sintering aids or binders allowing customers to structure their own product whatever the fabrication method required.

Grade E

This premium product has very high purity and even lower Ca, Si and Fe levels between 2-9 ppm enabling a finished translucent material.

Both E and H grade have primary particle sizes of about 0.6 micron and the particle surface has been stabilized to realize greater consistency. If you are hot pressing or cold forming, Tokuyama AlN powders offer the perfect solution to enable a high purity product with good thermal performance.

Most Recent Posts

Wear Resistant Ceramics: Sliding, Abrasion & Impact

Wear Resistant Ceramics: Sliding, Abrasion & Impact

How do ceramic materials perform against sliding, abrasive or impact wear?Ceramics are inherently very wear resistant due to their extreme hardness; these materials have values close to the hardest known material, diamond. They have also the capability to be machined...

Exploring the Different Types of Nuclear Fusion

Exploring the Different Types of Nuclear Fusion

The quest for achieving practical nuclear fusion has driven the exploration of various types of fusion, each offering a distinct methodology and holding its own promise for future energy production. At its core, nuclear fusion involves the merging of two light atomic...

Ceramic Manufacturing Process: Quantity, Design and Cost

Ceramic Manufacturing Process: Quantity, Design and Cost

How does quantity influence tooling costs and the ceramic manufacturing process?Quantity can be a game-changer in the ceramic manufacturing process. When you're making large quantities of ceramics, prices tend to drop, as with any other product. And that's when it...